Philips VRB661AT - Manual (Page 43)

Real-Time Counter Memory 43
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
I
Press the VCR button.
2
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Press the STOP/^ button
to stop the tape.
3
Press the STATUS/EXIT button to see the status display.
'STOP 1:08PM N
TV STEREO OHIO
I STEREO
SLP 1:23:45 HIFI
VRB66I only
4
While the status display is on the screen, press the
CLEAR button to reset the real-time counter to zero.
'STOP
TV STEREO
1:08 PM N
CHIO
STEREO
SLP 0:00:00 HIP!
VRB66I only
5
While the real-time counter is on the screen, press the
MEMORY button so that M appears beside the counter.
'STOP
TV STEREO
1:08 PM \
CHIO
STEREO
SLP M 0:00:00
VRB66I only
6
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind)/-^ button or the
F.FWD/^ button when playback is stopped.
When the tape reaches the point at which the counter was set to
zero, the tape will stop.
Press the PLAY/.A. button to watch the tape.
Helpful Hints
The MEMORY button does not func­
tion if REPEAT PLAY is set to ON.
Details are on page 42.
To erase a real-time counter memo­
ry, press the MEMORY button until
the M disappears from the screen.
You may only set the real-time
counter to zero at one location at a
time. If you set the real-time counter
to zero at a second location, the
previous real-time counter to zero
setting will be erased.