Philips VRB661AT User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

36 Timer Recording (contad)
Checking or Cancelling Timer Recordings
I
With the VCR on and in VCR position (the VCR light will appear
on the display panel), press the VCR button, then press the
MENU button.
2
Press the PLAY/.A. button or the STOP/^ button to select
PROGRAM, then press the F.FWD/>- button.
3
Press th& PLAY/
a
, button or the STOP/^ button to select
PROGRAM REVIEW, then press the F.FWD/^ button. The
timer recording information for the program in the lowest num
bered slot will appear on the screen. If no timer recordings are
set, nothing will happen when you press the F.FWD/^ button.
4
Press the F.FWD/^ button repeatedly to review all pro
grammed timer recordings. If you don’t press the F.FWD/^
button within 10 seconds, the VCR will automatically display infor
mation about the next programmed timer recording.This will con
tinue until all timer recordings have been displayed.Then the menu
will disappear.
5
To cancel the timer recording displayed, press the CLEAR
button. Either the display will disappear or information about
other timer recordings will appear. If you do not press any other
buttons, the display will disappear after all timer recordings have
been displayed.
6
Repeat steps I - 4 to make sure you have cleared the cor
rect timer recording.
Helpful Hints
• CLASH may fash on the screen
when you finish setting a timer
recording. This means that the timer
recording you just programmed and
another timer recording overlap. The
current timer recording will not take
place. You may choose to cancel the
overlapping timer recording.
• To stop a started timer recording,
press the STOP/EJECT button on
the VCR.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority. A message will
remind you when the timer record
ing was scheduled to begin. You may
let the OTR continue; the timer
recording will not take place. Or,
stop the OTR and turn off the VCR
immediately.The timer recording will
take place if you turn off the VCR
before the timer recording's sched
uled start time.
See page 52 for more hints.