Philips VRB661AT - Manual (Page 12)

12 Automatic Channel Setup
Although yourVCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you set up the channels again.
Press the VCR button.
2
Press the MENU button.
SELECT CHOOSE ►
^ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
3
Press the PLAY/^ button or the STOP/^ button to select
TUNER SET UP, then press the F.FWD/^ button.
SELECT CHOOSE ►
-^AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO ON
2ND AUDIO
VRB66I only
TO END PUSH EXIT
4
Press the PLAY/^ button or the STOP/^ button to select
AUTO PROGRAMMING, then press the F.FWD/^ but­
ton. The VCR distinguishes between TV channels and cable chan­
nels, and the VCR will memorize all the channels you receive.
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START EINISH
llllllllllllllllllllllll
5
Wait for a few minutes while the VCR sets up the chan­
nels. When this is complete, CHANNELS ARE SET will appear on
the screen.Then the programming of the lowest channel number
placed in the VCR’s memory will appear on the screen. Now when
you press the CH(annel) . a ./'V’ button, you will scan only through
channels you receive.
Helpful Hints
You can not enter the TUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002, AV REAR orAV FRONT will
appear on the screen briefly.
You can not program channels if you
are using a Cable Box or DBS.
If you have an antenna, channels 2-
69 will be available. If you have a
cable connection, channels 1-125
will be available.