Philips VRB661AT - Manual (Page 28)

28 Rear Panel
ANT(enna) IN Jack
Connect your antenna or cable
here. Details are on pages six-10.
AUDIO IN Jack(s) ------------------------------------------------------------ --------
Connect audio cables coming from the AUDIO OUT Jacks of a
camcorder, another VCR, or an audio source here. Details are on
page 37.
TheVRB66l is shown here.TheVRB461 has only one AUDIO IN jack.
AUDIO OUT Jack(s) ---------------------------------------------------
Connect audio cables going to the AUDIO IN Jacks of
a camcorder, another VCR, or an audio system here.
Details are on pages 37 and 47.
The VRB661 is shown here. The VRB461 has only one
AUDIO OUT jack.
\
n
VIDEO OUT Jack ---------------------------------------
Connect a video cable going to the ViDEO
IN Jack of a camcorder, another VCR, or an
audio-visual system (monitor, laser disc
player, video disc player, etc.) here. Details
are on pages 37 and 47.
AC Power Cord
Connect to a stan­
dard AC outlet to
supply power to the
VCR.
VIDEO IN Jack--------------------------
Connect a video cable coming
from the VIDEO OUT Jack of a
camcorder, another VCR, or an
audio-visual source (laser disc
player, video disc player, etc.)
here. Details are on page 3 7.
AUDIO
L
OUT IN
R
AIT
VIDEO
@ (S’
0 IT
CH3/CH4 Switch
Set to channel 3 or 4
to use your TV with
your VCR. Details are
on pages six-nine.
OUT Jack-------------------------
Use the supplied RF coaxi­
al cable to connect this
jack to the ANTENNA IN
Jack on your TV, Cable
Box, or Direct Broadcast
System. Details are on
pages six-nine.