Philips VRB661AT - Manual (Page 34)

34 Timer Recording (confd)
4
Use the Number buttons (I - 8) to select a slot in which
to store the timer recording. There are eight slots. Numbers
for open slots will flash on the screen.
NOTE If you enter a number for a slot that has already been used to store
a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen
briefly. Information about the program in that slot will appear on the
screen. If this happens, press the STATUS/EXIT button, then select another
number.
5
Use the Number buttons to enter the channel you want
to record.
• Cable Users, enter channel numbers as a two-digit number for
the quickest results. For example, to select channel 6, press 0,6.
If you only press the Number 6 button, channel 6 will be select­
ed after a brief delay. There also may be a brief delay when you
select channels 10, II, and 12. If you want to select channels 100
and above, enter channel numbers as a three-digit number. For
example, to select channel 117, press 1, 1,7.
Antenna Users, enter channel numbers as a two-digit number
for the quickest results. For example, to select channel 5, press
0,5. If you only press the Number 5 button, channel 5 will be
selected after a brief delay.
• If you are recording from line input, press 0,0 to select AV REAR.
(You can not select AV FRONT for this feature.)
• If you are using a Cable Box/DBS, select the Cable Box/DBS
output channel (03 or 04). Set the Cable Box/DBS to the chan­
nel you want to record. Leave the Cable Box/DBS on for the
timer recording. See page eight for details.
6
'ONETIME PROGRAM
PROGRAM I
CHANNEL 10
TIMEON
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
7
Follow the instructions in step 6 to enter the recording’s
stop time. (AM or PM will be set automatically.)
'ONETIME PROGRAM
PROGRAM I
CHANNEL 10
TIMEON 09:30 PM
TIME OFF
—
TO CORRECT PUSH CLEAR
^ TO END PUSH EXIT
4-7
Press two Number buttons for the hour you want the
recording to begin. Press two Number buttons for the
minute you want the recording to begin. Press I for AM or
2 for PM. For example, for 9:30 PM, press 09,30,2.
ñ POWER VCnnV EJECT
О О ©
( V
cbl J d E s
©
(PLA"^ —
■ STATUSixrr CLEAR
S CD Q
1
[D C
li
ш
WfiPUbCTER ALT, CH
~
SPEED БМЕ SEARCH PAUSBSTTU.
О О О
ЯЕООТП MEMORY SLOW
PHILIPS
Helpful Hints
Entries that do not match the VCR’s
clock or calendar will cause a ques­
tion mark to appear on the screen.
If you are recording from line input,
connect the audio and video cables
to the AUDIO IN and VIDEO IN
jacks on the back of the VCR. (You
can not select AV FRONT. Please see
illustration on page 37.)