Error response (ascii nak, nak = 0x1515), Preamble, Packet type – Moog Crossbow GNAV540 User Manual
Page 71: Length, Payload, Termination, Nak payload contents, Byte offset, Name, Format

GNAV540 User Manual
7430‐0808‐01 Rev. B
Page 71
Error Response
Table 31 Error Response
Error Response (ASCII NAK, NAK = 0x1515)
Preamble Packet Type
Length
Payload
Termination
0x5555
0x1515
0x02
2)>
T c he unit will send this packet in place of a normal response to a failedInputPacketType request if it could not be ompleted successfully. NAK Payload Contents Byte ffset O Name Format Scaling Units Description 0 failedInputPacketType U2 — — the failed request Output Packets (Polled) The following packet formats are special informational packets which can be requested using the GP command. Identification Data Packet Table 32 ID Data Packet Identification Data (‘ID’ = 0x4944) Preamble Packet Type Length Payload Termination 0x5555 0x4944 5+N payload> This packet contains the unit serialNumber and modelString. The model string is terminated with 0x00. The model string contains the programmed versionString (8‐bit ASCII values) followed by the firmware part number string Table 33 ID Payload Contents ID Payload Contents Byte ffset O Name Format Scaling Units Description 0 serialNumber U4 — — Unit serial number 4 modelString SN — — Unit Version String 4+N 0x00 U1 — — Zero Delimiter Version Data Packet Table 34 Version Data PKT Version Data (‘VR’ = 0x5652) Preamble Packet Type Length Payload Termination 0x5555 0x5652 5
delimited by a whitespace.