Moog Crossbow GNAV540 - Manual (Page 49)

GNAV540 User Manual
7430‐0808‐01 Rev. B Page 49
Figure 9 Configure Serial Port
Seri
The
al Port
Configure Serial Port dialog shows the
current Port and Baud rate, which can both be
conf ur ig ed. To do so:
1. Select the desired COM Port.
2. Either manually select the desired
Baud Rate or select Auto.
3. To apply the configuration, click Apply.
4. To ensure the configuration is saved in
NAV‐VIEW, click Save and Close.
Figure 10 Configure Ethernet Port
Ethernet Port
The Ethernet settings are configured in the
Ethe et
rn Form dialog. To do so:
1. Enter the Ethernet address of the
GNAV540 unit.
2. Enter the Ethernet Port number
te 3. To apply the configuration and activa
the connection, click Connect.
4. To ensure the configuration is saved
after rebooting the unit, click Save and
Close.
Record Data
NAV‐VIEW 2.2 can be used to log data to a text file (.txt). How data is logged can be configured: data type; logging
rate; recording length. The instructions follow: