Moog Crossbow GNAV540 - Manual (Page 56)

Page 56
GNAV540 User Manual
7430‐0808‐01 Rev. B
Adv
The
anced
Advanced tab provides access to more complex configurations, such as user behavior settings.
Figure 19 Advanced Settings
Viewing Current Configuration
To view the current configuration, click the Get All
Values button. The current settings will be displayed in
the text fields.
A box filled with blue color indicates the behavior switch
is enabled. Refer to Figure 19.
Changing Configurati
1. T e
ons
o nable a switch:
esired item under a. Checkmark the d
Set.
2. T s
Value to
o et a value, under Value to Set:
. a. Checkmark the box of the desired item(s)
, checkmark e box under Modify b. For each item th
new value under and enter the S
c.
Value to et.
Select either Temporary or Permanent.
Temporary: The configuration will not be
stored in non‐volatile memory (EEPROM). The
configuration will be applied, but the unit will
return to the Permanent configuration when it
is rebooted.
Permanent: The configuration will be stored in
non‐volatile memory. The unit will continue to
e configur rebooted. use th ation after being
3. Click the Set Values button.
The configuration values will be saved as specified:
emporary or Permanent. T
BIT Configuration
BIT Configuration enables configuring the logic of individual status flags that affect the masterStatus flag in the
master BITstatus field. Enabling individual status flags determines which flags are logically OR’ed to generate the
masterStatus flag. This provides the flexibility to listen to the indications that affect specified applications. For more
information about BIT status fields, refer to BIT Status Fields on page 98.