Longshine LCS-8056C2 - Manual (Page 72)

Commands for Host-Processed Modems Reference Manual
3-50 Conexant 100498E
= Set the V.8 CI signal call function to the hexadecimal octet value
X.
= Decimal number which enables/disables V.8bis negotiation.
0 Disable V.8bis negotiation. (Default.)
1 Enable DCE-controlled V.8bis negotiation.
2 Enable DTE-controlled V.8bis negotiation.
= ““. Applicable only for =5 (not
supported).
< protrange >= ““. Applicable only for =5 (not
supported).
Default values: 1,1,,1,"",""
The ATD and ATA commands behave as specified in §6.3.1/V.25ter and §6.3.5/V.25ter,
respectively, and +A8n indications are not generated by the modem.
Reporting Current or Selected Values
Command: +A8E?
Response: +A8E: ,,[,][,][,]
Example: +A8E: 1,1,,1,"","" For the defaults
Reporting Supported Range of Parameter Values
Command: +A8E=?
Response: +A8E: ( range),( range), (maximum size of v8cf in octets), (
range),( option bit
range),( option bit range)
Example: +A8E: (1,6),(1,5),(1),(0),(1,6),(1)