Longshine LCS-8056C2 - Manual (Page 140)

Commands for Host-Processed Modems Reference Manual
5-8 Conexant 100498E
Reporting Supported Range of Parameter Values
Command: +VTS=?
Response: ( range), ( range), ( range)
Example: (200-3000),(200-3000),(0-255)
Result Codes
OK Valid command.
ERROR The command is invalid, or a selected frequency is out of
range.
Example 1. This example illustrates tone generation without using any null elements. The
command example is followed by a description of command execution.
AT+VTS= {!,30},1,2,[1000,1300,50],!,{*,6},[800,1300,50],9
1. Hookflash with a duration of 300 ms.
2. Play DTMF 1 with a duration given by the +VTD command.
3. Play DTMF 2 with a duration given by the +VTD command.
4. Play tone pair at 1 000 Hz and 1 300 Hz with a duration of 500 ms.
5. Hookflash with a duration given by the +VTD command.
6. Play DTMF * with a duration of 60 ms.
7. Play tone pair at 800 Hz and 1300 Hz with a duration of 500 ms.
8. Play DTMF 9 with a duration given by the +VTD command.
Example 2. This example illustrates tone generation using null elements. The command
example is followed by a description of command execution.
AT+VTS=1,2,[1000,1300,50],[800],9
1. Play DTMF 1 with a duration given by the +VTD command.
2. Play DTMF 2 with a duration given by the +VTD command.
3. Play tone pair at 1000 Hz and 1300 Hz with a duration of 500 ms.
4. Play tone pair at 800 Hz with a duration given by the +VTD command.
5. Play DTMF 9 with a duration given by the +VTD command.
Example 3. This example illustrates tone generation using null elements and periods of
silence. The command example is followed by a description of command execution.
AT+VTS=1,[,,50],2,[],9
1. Play DTMF 1 with a duration given by the +VTD command.
2. Play silence with a duration of 500 ms.
3. Play DTMF 2 with a duration given by the +VTD command.
4. Play silence with a duration given by the +VTD command.
5. Play DTMF 9 with a duration given by the +VTD command.