Longshine LCS-8056C2 - Manual (Page 103)

Commands for Host-Processed Modems Reference Manual
100498E Conexant 3-81
3.4 Result Codes
The modem responds to commands from the DTE and to activity on the line by signaling to
the DTE in the form of result codes. The result codes that the modem can send are described
in Table 3-15.
Two forms of each result code are available: long-form, an English-like "verbose" response,
and short-form, a data-like numeric response (included in parentheses following the long-
form). The long-form code is preceded and terminated by the sequence < CR> < LF>. The
short-form is terminated by < CR>, only with no preceding sequence.
If result messages are suppressed, nothing is returned to the DTE. The long-form results codes
can be modified by the OEM through the .INF file.