Longshine LCS-8056C2 - Manual (Page 144)

Commands for Host-Processed Modems Reference Manual
5-12 Conexant 100498E
+VLS - Analog Source/Destination Selection
This command causes the modem to select one or more source/destinations of the analog data.
Syntax
+VLS=
Defined Values
Decimal number corresponding to the selected option (see
Table 5-4).
Table 5-4. +VLS Command Options
Label Description
0 Modem on-hook. Local phone connected to the line.
1 Modem off-hook and connected to the line. Local phone provided with power to detect hook condition.
2 Modem on-hook and connected to the Local phone.
3 Modem off-hook and connected to the line and Local phone.
4 Internal Speaker connected to the Modem. Modem on-hook. Local phone connected to the line.
5 Internal Speaker connected to the line. Modem off-hook and connected to the line. Local phone provided with
power to detect hook condition.
6 Internal Microphone connected to the Modem. Modem on-hook. Local phone connected to the line.
7 Internal Microphone and Internal Speaker connected to the line. Squelching active. Modem off-hook and
connected to the line. Local phone provided with power to detect hook condition.
8 External Speaker connected to the Modem. Modem on-hook. Local phone connected to the line.
9 External Speaker connected to the line. Modem off-hook and connected to the line. Local phone provided with
power to detect hook condition.
10 Internal Microphone and External Speaker connected to the line. Squelching active. Modem off-hook and
connected to the line. Local phone provided with power to detect hook condition.
11 External Microphone connected to the Modem. Modem on-hook. Local phone connected to the line.
12 External Microphone and Internal Speaker connected to the line. Squelching active. Modem off-hook and
connected to the line. Local phone provided with power to detect hook condition.
13 External Microphone and External Speaker connected to the line. Squelching active. Modem off-hook and
connected to the line. Local phone provided with power to detect hook condition.
14 External Microphone and Speaker combination (handset or headset) connected to the Modem. Modem on-
hook. Local phone connected to the line.
15 External Microphone and Speaker combination (handset or headset) connected to the line. Modem off-hook
and connected to the line. Local phone provided with power to detect hook condition.
16 or 30 Mute Speakerphone Microphone.
17 or 31 Unmute Speakerphone Microphone.
18 or 32 Mute Speakerphone Speaker.
19 or 33 Unmute Speakerphone Speaker.
128 Modem on-hook, local phone connected to the line, external speaker connected to the modem. Caller ID relay
output active.
129 Modem off-hook, local phone connected to the line, MIC_M routed to TXA. Typically used for music during
handset conversation. Do not use this mode to answer incoming ring.
130 Modem off-hook, local phone disconnected from the line, MIC_M routed to TXA. Typically used to play greeting
from audio codec.
131 Modem off-hook, local phone connected to the line, external speaker connected to the line. Typically used for
recording a handset conversation through a sound card.
Notes:
1. Internal and External Microphone are treated the same by the Modem device set.
2. Internal and External Speaker are treated the same by the Modem device set.