Longshine LCS-8056C2 - Manual (Page 62)

Commands for Host-Processed Modems Reference Manual
3-40 Conexant 100498E
+EB - Break Handling in Error Control Operation
This extended-format compound parameter controls the break handling in V.42 operation. It
accepts three numeric subparameters:
Syntax
+EB=[[,[,]]]
Defined Values
Decimal number 0 specifying that break is to be ignored, i.e., not
signaled to remote DCE.
Decimal number 0 specifying that any transmitted V.42 L-
SIGNAL will not indicate break signal length
Decimal number 0 specifying that break is not delivered to the
DTE.
Reporting Current or Selected Values
Command: +EB?
Response: +EB: ,,
Example: +EB: 0,0,0 For default settings.
Reporting Supported Range of Parameter Values
Command: +EB=?
Response: +EB: ( range),( range), (default_length> range)
Example: +EB: (0),(0),(0)
+ESR - Selective Repeat
This extended-format numeric parameter controls the use of the selective repeat (SREJ)
option in V.42.
Syntax
+ESR=[].
Defined Values
Decimal number 0 specifying that SREJ is not used.
Example:
+ESR:0 For default settings.