Syntax, Defined values, Reporting current or selected values – Longshine LCS-8056C2 User Manual
Page 153: Reporting supported range of parameter values, Result codes
Commands for Host-Processed Modems Reference Manual
100498E
Conexant
5-21
+VPR - Select DTE/Modem Interface Rate (Turn Off Autobaud)
This command selects the DTE/modem interface rate.
Syntax
+VPR=
Defined Values
Decimal number corresponding to the DTE/modem interface rate
where 0 = autobaud rate determined by processing the AT
command, and 1,2,3,4,8,16,24,48 correspond to multipliers of
2400 bps to determine the actual rate:
0
=
Autobaud
1 = 2400 bps
2 = 4800 bps
3 = 7200 bps
4 = 9600 bps
8 = 19200 bps
16 = 38400 bps
24 = 57600 bps
48 = 115200 bps
Reporting Current or Selected Values
Command: +VPR?
Response:
Example:
0
For the default setting (Autobaud).
Reporting Supported Range of Parameter Values
Command: +VPR=?
Response: (
range)
Example: (0,1,2,3,4,8,16,24,48)
Result Codes
OK
=
0,1,2,3,4,8,16,24,48.
ERROR
Otherwise, or if not in Voice Mode.