Longshine LCS-8056C2 - Manual (Page 116)

Commands for Host-Processed Modems Reference Manual
4-6 Conexant 100498E
4.2 Commands and Parameters
4.2.1 Mode Entry Commands
+FCLASS=1 - Select Facsimile Class 1 Mode
+FCLASS=1 selects the Fax Class 1 Mode. The Fax Class 1 Mode commands and responses
described in this section are applicable when command +FCLASS=1 as shown in Table 4-1.
(See +FCLASS in Section 3.2.1 for the definition of the FCLASS command.)
+FCLASS=1.0 - Select Facsimile Class 1.0 Mode
+FCLASS=1.0 selects the Fax Class 1.0 Mode. The Fax Class 1.0 Mode commands and
responses described in this section are applicable when command +FCLASS=1 as shown
Table 4-1. (See +FCLASS in Section 3.2.1 for the definition of the FCLASS command.)
4.2.2 Mode Commands
+FAE - Auto Answer Enable
This command enables or disables fax adaptive answer.
Syntax
+FAE=
Defined Values
Decimal number corresponding to the selected option.
0 Disable data /fax auto answer mode. (Default.)
1 Enable data /fax auto answer mode. The modem
determines the calling type and issues DATA result
code (13) if the caller is a data modem or issues FAX
result code (15) if the caller is a fax modem.