KGUARD Security AR 1621-2CKT001 - Manual (Page 36)

ENGLISH
Aurora Series: Configuring DVR Settings
36
DVR User’s Manual
• Overlay Settings
Use these settings to include a date/time and camera name on a video stream per
channel.
In Time/Date, click Settings and select the channel that you want to set the overlay
settings.
To include the date/time and/or channel name on the recorded file, check the
respective box.
Click Apply to save the settings.
Margin
When the DVR is connected to a
monitor, you can define the image size
and position to be displayed on the
screen.
Drag the slider bar to adjust the top,
bottom, left and right margin setting.
Click Apply to save the settings.
Auto Sequence
When auto sequence mode is
activated (see
“Task Bar” on page
26 ), the DVR will automatically
cycle through all available channels,
displaying each in turn expanded to
fill the entire screen. The channels can
be displayed on the screen stencil or
customized pattern.
Auto sequence: Select the auto
sequence type.
To customize the auto sequence order,
select Custom and do the following:
• Click + to configure the new
display setting including the
display mode, channel layout,
and dwell time settings.
• Click X to remove the selected
settings.