KERN & SOHN KXS-TM - Manual (Page 80)

19 Service menu
Verified weighing systems:
• In verified weighing systems the access to the service menu is locked.
In order to unlock the access , the sealing must be destroyed (see chapter 6.9)
and the housing opened. On the plate move the adjusting switch SWA1 to
position „ADJ”. Switch on equipment,
is indicated.
• After the configuration, the access to the service menu must be locked again.
Also move the adjusting switch to the position „LOCK “ .
At the same time it leaves the service mode, the appliance returns to the
weighing mode.
• Attention:
After destruction of the sealing the weighing system must be re-verified by an
authorised agency and a new sealing fitted before it can be reused for
applications subject to verification.
Unverified weighing systems
 With unverified weighing systems the housing does not have to be opened,
the access to the service menu is protected only by a password ("002011“, not
changeable).
 Use the on/off key to switch on an appliance with pressed UNIT key.
 Press TARE button, „--------„ is displayed.
 With the navigation keys (see chapter 2.1.1) Enter password "002011".
At incorrect input the scale completes a self check and returns back into the
weighing mode.
 Confirm with TARE key. The first menu block is displayed.
 With the navigation keys (see chapter 2.1.1) select desired menu block.
 To exit the menu
/ return to the weighing mode, switch device off
and on again with the ON/ OFF key.
ADJ
LOCK
SWA1
80 KXS/KXG-TM-BA_IA-e-1420