KERN & SOHN KXS-TM - Manual (Page 46)

10.7 Automatic reference optimisation with the unit count (function „FnC 07 “ )
 Call up function „FnC 07“, see chapter 10 "Navigation in the menu“.
 Press the TARE-key, current setting appears.
 Select desired settings with TARE or UNIT key.
AvErG 0 No reference optimisation
AvErG 1 Reference optimisation is activated. The device automatically
determines the weight per unit again, if the number of parts has
increased
 Confirm with the TARE key, the display returns back to the menu.
 Return to weighing mode, see chap. 10.
46 KXS/KXG-TM-BA_IA-e-1420