Keri Systems PXL-510 User Manual
Quick start guide
This manual is related to the following products:
Table of contents
Document Outline
- 1.0 Specifications
- 2.0 Cable Requirements
- 3.0 When Installing Controllers
- 4.0 Wiring Instructions
- 4.1 Terminal Blocks
- 4.2 Connecting the Earth Ground and the 12 VDC Power
- 4.3 Connecting a Keri Systems Proximity Reader to a PXL-500P/PXL-510P
- 4.4 Connecting a Wiegand Compatible Reader to a PXL-500W/PXL-510W
- 4.5 Connecting a Door Status Input
- 4.6 Connecting a Request to Exit (RTE) Input
- 4.7 Connecting a General Purpose Input
- 4.8 Connecting an Alarm Output Relay
- 4.9 Connecting a Fail-Safe Lock Output Relay
- 4.10 Connecting a Fail-Secure Lock Output Relay
- 4.11 RS-485 Access Control Network Connection
- 4.12 Communication Between the Access Control Network and Host Computer
- 4.13 Alarm Control Panel to PXL-510 Connection
- 5.0 Powering The Controller for the First Time
- 6.0 General Information on Inputs
- 7.0 General Information on Safety versus Security with Door Locks