Keri Systems PXL-510 - Manual (Page 10)

PXL-500 / PXL-510 Tiger Controller
Quick Start Guide
Page 10 of 24 P/N: 01918-001 Rev. B
4.7 Connecting a General Purpose Input
The general-purpose input is used in conjunction with the programmable input/output feature of the Doors access control
software. There are three possible uses for the general-purpose input.
• the master controller may be figured for either Global Unlock (see figure 9) or Auxiliary A-door RTE (see figure 10)
• the slave unit may be figured for Auxiliary A-door RTE (see Figure 10)
Make the following connections for a Global Unlock input.
Figure 9: Global Unlock Input Connections
Make the following connections for an Auxiliary A-door RTE input.
Figure 10: Auxiliary A-Door RTE Input Connections