Keri Systems KE-8 User Manual
Ke-8 controller enclosure, 0 specifications, Installation guide
KE-8 Controller Enclosure
Installation Guide
Page 1 of 5
P/N: 01515-001 Rev. C
Section 1 – Specifications
Section 2 – Wall Mounting the Enclosure
Section 3 – Controller Installation
Section 4 – Tamper Relay Board Mounting
Section 5 – Wire Routing
Section 6 – Keri Contact Information
The KE-8 Controller Enclosure handles up to four NXT Controllers or PXL Controllers in a powder-coated, steel box.
The KE-8 has two locks to ensure the lid is secured to the enclosure body.
1.0
Specifications
1.1
Dimensions
•
15.75 inches tall by 17.50 inches wide by 6.625 inches deep
•
40.00 cm by 44.45 cm by 16.83 cm
1.2
Weight
•
13.6 lbs / 6.17 kgs – Enclosure only
•
Up to 25 lbs (11 kgs) for a fully loaded enclosure
1.3
Knockouts
•
14 at 0.688 inches (1.75 cm) – 4 each top and bottom, 3 each left and right sides
•
4 at 0.880 inches (2.24 cm) – 2 each top and bottom