Keri Systems PXL-510 - Manual

PXL-500 / PXL-510 Tiger Controller
Quick Start Guide
Page 1 of 24 P/N: 01918-001 Rev. B
This quick start guide provides, basic installation information, drawings, first time power-on instructions, and short
descriptions of key terms and concepts for installing controllers. These instructions apply to the PXL-500, PXL-510 and
Time and Attendance Terminals. For information regarding the use of the PXL-510 controller in connection with the
NetworX
1
NX-8E Alarm Panel, please refer to the NetworX NX-8E Alarm Panel Application Note (P/N 01919-001). For
information regarding a Time and Attendance Terminal, please refer to the Time and Attendance Terminal Application
Note (P/N 01943-001).
NOTE: It is the responsibility of the installation organization to have only technically qualified personnel performing the
installation.
NOTE: All references to the PXL-500 may be applied to the Time and Attendance Terminal.
Figure 1: The PXL-500/PXL-510 Controller
1. NetworX is a trademark of GE Interlogix.