Keri Systems MS-5000 User Manual
Ms-5000 ministar reader, Ms-5000 quick s tart guide, The ms-5000 ministar reader
MS-5000 MiniStar Reader
2305 Bering Drive
01815-002 Rev. G
San Jose, CA 95131 USA
(800) 260-5265 (408) 435-8400 FAX (408) 577-1792
Web: www.kerisys.com E-mail: [email protected]
Page 1 of 8
MS-5000
Quick S
tart Guide
The MS-5000 MiniStar Reader
The MS-5000 MiniStar Reader is intended for installation in a single gang electrical "J-Box," in
proximity applications where an unobtrusive reader is required. It can also be mounted directly onto
nonmetallic walls. The reader provides an audible beeper and a multi colored LED to annunciate
the reader's status when used with a PXL-250, PXL-100, or IntelliProx.
•
Amber - to indicate normal operation awaiting an access event
•
Green - to indicate a valid card has been presented or the door has been unlocked for access
•
Red - to indicate an invalid card has been presented or the door is in an alarm condition
The MS-5000 MiniStar Reader is housed in a black or white, weatherproof, shock resistant
package. The reader provides optimum performance when mounted at least one inch away from
metal surfaces; read range is reduced if the reader is mounted on or near metal surfaces.
1.0
Specifications
1.1
Dimensions
•
4.38 inches High x 3.00 inches Wide x 0.375 inches Deep
•
11.13 cm High x 7.62 cm Wide x 0.96 cm Deep
Figure 1: MS-5000 Dimensions