Keri Systems MS-3000 User Manual
Ms-3000 microstar reader, Ms-3000 quick s tart guide, The ms-3000 microstar reader
MS-3000 MicroStar Reader
2305 Bering Drive
01815-001 Rev. H
San Jose, CA 95131 USA
(800) 260-5265 (408) 435-8400 FAX (408) 577-1792
Web: www.kerisys.com E-mail: [email protected]
Page 1 of 8
MS-3000
Quick S
tart Guide
The MS-3000 MicroStar Reader
The MS-3000 MicroStar Reader is intended for installation on a window mullion or a door frame,
on or off metal, in proximity applications where an unobtrusive reader is required. The reader
provides an audible beeper and a multi colored LED to annunciate the reader's status when used
with a PXL-250, PXL-100, or IntelliProx.
•
Amber - to indicate normal operation awaiting an access event
•
Green - to indicate a valid card has been presented or the door has been unlocked for access
•
Red - to indicate an invalid card has been presented or the door is in an alarm condition
The MS-3000 MicroStar Reader is housed in a black, weatherproof, shock resistant package. The
reader provides optimum performance when mounted on aluminum; read range is slightly reduced
if the reader is not mounted on aluminum.
1.0
Specifications
1.1
Dimensions
•
3.25 inches High x 1.41 inches Wide x 0.375 inches Deep
•
8.26 cm High x 3.95 cm Wide x 0.96 cm Deep
Figure 1: MS–3000 Dimensions