beautypg.com

Juniper Systems ltra-Rugged Field PC Extended Caps User Manual

Page 5

background image

3. Tighten the Communication Cap screws

until they are firmly in place. To properly

seal the cap, apply an extra ¼ to ½

turn after the screws become

hard to turn.

2. Insert your card. To keep your

card securely in its slot, cushion

it by placing small or medium-

sized foam pieces inside the

top of the cap. Insert enough

foam into the cap so that

when you slide the cap back

onto the Field PC with little

pressure, a ¼ inch (6 mm)

gap remains between the cap

and the Field PC as shown.

¼ in. (6 mm) gap

5