Juniper Systems Barcode Expansion Pod - Manual (Page 14)

1
Bar Code Expansion Pod
K = UCC/EAN-128
L = Bookland EAN
M = Trioptic Code 39
N = Coupon Code
Prefix and Suffix
The Prefix, Suffix 1, and Suffix 2 character selection pull-
down window lists the characters that can be used as
a prefix or suffix. Only the prefix or suffix pull-down
windows that are enabled are shown. The prefix and
suffix options are:
Option Description
None No function is performed.
=Line Feed, which moves the cursor down
to the same column on the next line.
=Carriage Return, which causes the cursor
to move to the left margin, often used with line
feed to start a new line of output.
# Adds a # sign before of after the scanned bar
code (depending on suffix or prefix)
Tab Performs a Tab key function, which moves the
cursor over to the next column.
Code Type setup
The Code Type tab lists the bar code types that the scanner
can read. You can enable (box checked) and disable (box