beautypg.com

Juniper Systems Trimble Lassen GPS Expansion Pod User Manual

Page 6

background image

Field PC GPS Expansion Pod

Reset Receiver

The Reset Receiver button returns all of the settings on the

GPS receiver to their default setting. This function enables

you to start over in the event that an error was made.

2.

Tap on the Get Settings button and wait approximately

one minute for the settings to appear.

3.

Record the settings for the following:

COM Port: COM3—not changeable

Protocol:

Baud:

Parity:

Data Bit: (Note: Data Bit is always set at 8 and is not

shown in the set up)

Stop Bit:

The following are the default GPS pod settings:

COM Port: COM3 —not changeable

Protocol: TSIP

Baud: 9600

Data Bit: 8—not changeable

Parity: None

Stop Bit: 1

4.

Access the setup or configuration menu in the GPS

program.

5.

Change the parameters on the GIS/GPS configuration

menu of the program to match the default GPS

Expansion Pod settings or change the parameters on