Tips for using the gps expansion pod – Juniper Systems Trimble Lassen GPS Expansion Pod User Manual
Page 10

10
Field PC GPS Expansion Pod
Tips for Using the GPS Expansion Pod
Keep the following tips in mind while using the Field PC
with the GPS Expansion Pod:
When attempting to receive GPS signals, get the
clearest view of the sky as possible. Obstructions such
as buildings, trees, mountains, and your body can
keep signals from reaching the receiver.
Do not cover the antenna with anything while you are
using the system.
The antenna can be mounted on a vehicle or a pole, a
longer antenna cable is required to do this (call your
Sales Account Manager).
Using the GPS Expansion Pod, and GIS or GPS software
running on the Field PC may cause the Field PC battery
to drain at a faster rate. This rate depends on the
software and how much processing is taking place.
The PC card slot is accessible while the GPS Expansion
Pod is attached to the Field PC. Refer to the Field PC
Owner’s Manual for details on how to use it. There is
a flat, brown flex cable that is part of the expansion
pod that is visible when you open the pod door. Do not
twist, bend, or break this cable while you are using the
PC card slot.
If you remove the antenna, place the protective cap over
the antenna connector to keep dirt and moisture out.