beautypg.com

11 gps antenna bracket removal, Gps installation program – Juniper Systems Trimble Lassen GPS Expansion Pod User Manual

Page 11

background image

GPS Expansion Pod

 

11

GPS Antenna Bracket Removal

The GPS antenna bracket can be removed and reattached

depending on your needs. To remove the GPS antenna

bracket from your Field PC, complete the following steps:

1.

Unscrew the antenna cable from the Field PC

expansion pod.

2.

Loosen the thumbscrews on the antenna bracket so

that the antenna bracket and the two knobs at the end

of the antenna bracket are no longer securely fastened.

3.

Pull the antenna bracket off of the Field PC.

The antenna bracket can be reattached to the Field PC by

following the instructions in the Attaching the Antenna section.

GPS Installation Program

The GPS Setup Program is installed on your Field

PC before it is shipped. In the event that the GPS

program gets removed from your Field PC and needs

to be reinstalled, use the GPS installer on the User

Documentation and Install CD shipped with the Field PC.

P/N 20208-00 Copyright 07/2008