beautypg.com

Juniper Systems Trimble Lassen GPS Expansion Pod User Manual

Page 5

background image

GPS Expansion Pod

 

1.

Go to Start > Programs > GPS Pod Setup, and the GPS

Receiver Port Settings screen opens.

At the bottom of the screen, there are three function

buttons:

Get Settings
Apply Settings
Reset Receiver

Get Settings

The Get Settings button is used to see the receiver’s current

settings without changing the settings. Pressing Get

Settings performs a search for the GPS receiver, the search

can take up to one minute to find the settings. Once

the search is complete, the current settings for the GPS

receiver are displayed.

Apply Setting

Tap on the Apply Settings button to save and apply new

settings. To make sure that your settings are applied

correctly, press Get Settings to check the parameters.