beautypg.com

Philips 48UP910 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

. . .

before calling service

Symptoms

Items to Check and Actions to follow

TV not respond­

ing to remote

control

Check batteries and replace them if necessary.

Clean the remote control sensor lens on the TV.

Operating range between TV and remote control
should not be more than 6 metres.

NICAM sound
distortion
(crackling noise)

This could be due to the antenna siting or reflected

signal.

• Switch over to the "NICAM Mono" mode by pressing

the I-n button.

Blue or red

colour appears
around the
edges of picture

The convergence of the picture has probably drifted.

• Select the "FEATURES" menu and select

"Convergence." Adjust accordingly.

No On-Screen-
Display

• Check that you are not in the "Teletext" mode or

"Subtitle Txt" mode. To see the On-Screen-Display,
exit from this mode.