Philips STU 901/25R - Manual (Page 24)

storing a station To select double height text
- press 7 to STORE your settings
- press 3 to continue searching (see above) or press MENU
OFF to exit
NOTES:
- A maximum of 98 stations can be stored in the memory.
- If a bad picture appears it is possible that your dish antenna is
not precisely directed at the satellite and needs adjustment.
- Programme numbers (PR) 00 and 99 are reserved for specific
functions:
1) On PR 00, D2-MAC signals received from a VCR are pro­
cessed by the Receiver for replaying on your TV screen. This
is the case when your VCR is able to record and playback D2-
MAC signals.
2) On PR 99, D2-MAC signals received by your TV are pro­
cessed by the Receiver for playing on your TV screen. This is
the case when you have a MAC-capable TV set.
Using Teletext (D2-MAC only)
Introduction
Your STU 901 Receiver allows you to see Teletext information
pages from D2-MAC satellite TV broadcasts - even if your set
does not have Teletext.
Switching on Teletext
-Select the programme number for a satellite
programme that transmits Teletext.
-Press the m button. Usually the index page (e.g.
page 100) can then be seen on the screen. If the
screen remains black, no teletext is transmitted.
Selecting a Teletext page
-Press 3 digit buttons (e.g. 6 then 5 then 0 for
page 650). This starts then page indicator.
When the page indicator is the same as the
required page number it stops and the Teletext
page is shown on the screen. If the Teletext
page you have chosen is not available, then the
page indicator continues, until you select a
Teletext page that can be found. You may also
select pages using the - + buttons.
Press the (S) button to return to page 100.
CD (D CD
CD (D CD-
CD CD CD'
CD m
To switch off Teletext temporarily
(x) (M)
-Press the X button. Only the page number is
shown on the screen when the page is updated.
-If you want to switch on Teletext again press
the X button.
Note: If the Teletext page is updated the top half of the page is
automatically selected.
-Press the © button to see the top half
of the Teletext page enlarged on the
screen.
-Press the © button to see the bottom
half of the Teletext page enlarged on the
screen.
-If you want to return to normal height text press the ©
button again.
To show concealed information
Some Teletext pages contain quizes or riddles.
-Press the ? button to show the concealed
information.
-Press the ? button again to hide this
information.
To stop automatic page changes (of
‘rotating’ pages)
Some information in Teletext needs more than
one page. Each page is shown automatically in
sequence.
-Press the ® button to stop the page
changing automatically.
-Press the ® button to return to normal Teletext use.
To see Teletext and a TV programme
simultaneously (D2-MAC only)
-Press the @ button to superimpose teletext
over the TV programme.
- Press the @ button again to return to normal
teletext use.
To quit Teletext
(M)
®
MD -Press the g) button
To store Teletext personal preference pages
You can store up to 20 Teletext pages that you frequently use.
Note: Teletext must not be switched on.
- Press MENU button (8) on the remote control
- Press 7 to select INSTALLATION
- Press 5 to select D2-MAC Teletext
- Press 1 to SELECT
If Teletext page numbers have not been previously stored then
an empty list is shown:
20