Philips VKR 9010 - Manual (Page 34)

other connections
Other functions
Recording speed selector
SP : For normal tape speed
(30 minutes with SE-C30 cassette)
LP : For slow tape speed
(60 minutes with SE-C30 cassette)
Memory search function
DISPLAY
O O
MEMORY RESET
1
2
Press the RESET button at the desired point. The
tape counter is reset to “0:00.0”.
Press the DISPLAY MEMORY button.
• The “M” indication appears in the electronic
viewfinder (EVF) and in the LCD.
Q After pressing the STOP button, press the REV
(REWIND/REVIEW) button.
• The tape will stop automatically at about the
point where the tape counter reads “0:00.0”.
Counter indication
By repeatedly pressing the DISPLAY MEMORY button,
the counter indication can be changed in the following
sequence.
Tape counter
indication
Memory appears
with tape counter
indication
Tape counter
indication
On screen display
To delete the counter indication in the EVF, press the
ON SCREEN DISPLAY button (OSD). To make this
indication appear again, press this button once more.
Remaining tape time indication
During recording, playback, insert editing, and audio
dubbing, the remaining tape time is indicated in
minutes. When the remaining tape time becomes less
than 2 minutes, the indication will flash.
TAPE SELECT button
When using cassette tapes with long recording time
(45 minutes in the SP mode, 90 minutes in LP mode),
press the TAPE SELECT button so that the cassette
indication “T-45” appears. When the cassette is
ejected, the indication will change to “T-30”.
32