Setting the date and time, How to insert the battery for the clock operation, Cautions for battery replacement – Philips VKR 9010 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the date and time

How to Insert the battery for the clock

operation

Insert the “CR2032” size battery with polarities
(+ and -) aligned correctly and then replace the
lid.

Notes:

• This battery is necessary for the date and the time,

tide, S-VHS-C and white baiance modes to be
memorized by the Camcorder.

• if the battery is not inserted or if it is exhausted, the

indication “BACKUP" in the eiectronic viewfinder

(EVF) wiit fiash for approximateiy 10 seconds when

turning the Camcorder on.

• When replacing the battery while the time and the

date indications are stiil correct, connect the
Camcorder to the AC adaptor for the duration of the
battery replacement so that the time will remain

unchanged.

CAUTIONS FOR BATTERY REPLACEMENT

• The life of the battery is about one year. Inspect

and if necessary, replace the battery once a year.

• Load the new battery with its polarities (+ and -)

aligned correctly.

• Remove spent battery immediately and dispose of

it.

• Do not try to short-circuit, recharge or heat the

battery and do not throw it into a fire.