Philips VKR 9010 - Manual (Page 27)

Playback
Preparation
1. Slide the POWER switch to the right.
2. Insert the recorded cassette.
3. Set the EDIT switch to “OFF”.
4. Select the playback sound with the AUDIO
SELECTOR switch:
Hi-Fi : To reproduce the sound on the Hi-Fi
sound track.
NORMAL : To reproduce the sound on the normal
sound track.
MIX : To reproduce both the sound on the
Hi-Fi and on the normal sound tracks.
5. Set the CAMERA/VCR selector switch to “VCR”.
Operations
■| Playback: Press the PLAY ► button.
2 Cue playback: Keep the FWD 0 button pressed
during playback.
0 Review playback: Keep the REV 0 button
pressed during playback.
Still playback: Press the PAUSE/STILL II button
during playback.
• To return to normal playback, press this
button again.
0 Press the STOP ■ button to finish playback.
Fast forward
Press the FWD 0 button to rapidly wind the tape
forward.
Rewind
Press the REV 0 button to rapidly rewind the tape.
Tracking controi
Digital tracking switch
DATE/riME ►
SHIFT
O
DIGITAL TRACKING
OFF ep ON
EDIT
OFF ON
MIX-
Hi-Fi
AUDIO SELECT
NORMAL
1 Set the DIGITAL TRACKING switch to “ON” for
normal use. (The tracking will be adjusted
automatically.)
If the tracking is not adjusted properly, for
example when playing back a tape recorded on
another unit, set this switch to “OFF” and adjust
in the following way.
2 Adjust the tracking with the TRACKING or ►
buttons to minimize noise.
Notes:
• The sound will be played back only during normal
playback.
• Playback: The tape will be rewound automatically
when It reaches its end.
• Fast forward: The tape will stop automatically when
it reaches its end.
• Rewind: The tape will stop automatically when it
reaches its beginning.
• Still playback: If the Camcorder is left in this mode
for about 6 minutes, it will switch over to the stop
mode, to protect the tape and video heads.
• To ensure optimum sound reproduction, set the
AUDIO SELECTOR switch to the position "Hi-Fi" for
ordinary use.
25