Straight pin, Hooking up the tvivcr (ant’d) 7 – Philips CCB 132AT User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hooking Up the TVIVCR (ant’d) 7
D.
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Details are on page 31.
AUDIO/VIDEO OUT
Jacks on VCR
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO Jack on
the front of the TV/VCR,
CCBI30
AUDIO/VIDEO
Jacks
on front of TV/VCR
Use a Video cable to connect the VIDEO OUT Jack on the
VCR to the VIDEO Jack on the front of the TV/VCR.
2
Plug in theTV/VCR's power cord.
3
Before you turn on the TV/VCR, go to page eight.
Helpful Hint$
Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
A rod antenna (not supplied) is available from Philips Service Solutions Group.The part number is 4835 303
3 7
OO
6
.T
0
order, call 1-800-851-8885. (This antenna will fit the CCBI30 and CCBI32 only.)
Audio and video cables are not supplied.
Straight Pin