26 on-screen status displays – Philips CCB 132AT User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
26 On-Screen Status Displays
A status display will appear when you press the STATUS/EXIT but
ton or certain function buttons.The contents of the status dis
play will vary.To choose the status display mode, follow the
steps below.
If you select STATUS ON, then select COUNTER ONLY
OFF:
s Whenever you press the STOP/'V’ button or the PLAY/
a
. but
ton, the status display will appear for five seconds. Portions of
the status display also may appear when you press other func
tion buttons.
If you select STATUS ON, then select COUNTER ONLY
ON:
Whenever you press the PLAY/
a
button, the status display will
appear for five seconds. After five seconds, only the counter will
remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS OFF;
The status display will not appear when you press function but
tons.You must press the STATUS/EXIT button to see the status
dgplay,
■
1
2
press the MENU button.
Press the PLAY/A button or the STOP/T button to select
VCR SETUP, then press the F.FWD^ button.
3
Press the PLAY/A button or the STOP/T button to select
ON-SCREEN MODE, then press the F.FWD/^ button.
4
Press the PLAY/
a
button or the STOP/^ button to select
STATUS, then press the F.FWD/>- button so that ON or
OFF appears beside STATUS.
If you set STATUS to OFF, go to step 6. If you set STATUS
to ON, press the PLAY/
a
button or the STOP/^ button
to select COUNTER ONLY, then press the F.FWD/^ but
ton so that ON or OFF appears beside it.
6
Channel
Current
Tape
Counter
Memory
Press the STATUS/EXIT button.
Helpful Hint
You cannot
view
closed captions dur
ing recording or tape playback if
COUNTER ONLY is set to ON.
Details are on pages 49-50.