Philips CCB 132AT - Manual (Page 10)

10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
[
2-3
press the MENU button.
> PRIM. SETUP 1 PRESSV '
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
/
y
2
Press the PLAY/A button or the STOP/T button to select
PRIM, SETUP then press the RFWD/^ button.
PRIMARY SETUP
• SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR [ON]
SET CLOCK
SELECT AT CHOOSE ►
TO END PRESS EXIT
3
Press the PLAY/A button or the STOP/T button to select
AUTO PROGRAMMING, then press the F.FWD/^ but­
ton.
AUTO CH PROGRAMMING ... will appear on the screen.
The TV/VCR distinguishes between TV channels and cable channels
automatically, and the TV/VCR will memorize its available channels.
4 Wait for the TV/VCR to set up
channels.
4
Wait for a few minutes. When setup is complete, CHANNELS
ARE SET will appear on the screen.Then the programming of the
lowest channel number placed in theTV/VCR’s memory will
appear on the screen. Now, when you press the CH(annel) A/v
button, you will scan only through channels you receive.
Helpful Hint
Line Input mode will always be
stored in the TVIVCR's memory as
channel 00. You cannot delete it