Philips CCB 132AT - Manual (Page 40)

40 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
I
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
' 01 08 PM STOP
CHIO
:T3 15
While the counter remains on the screen, press the
CLEAR button to reset the real-time counter to zero.
4
While the counter remains on the screen, press the MEM­
ORY button so that M appears on the screen.
To erase a
real-time counter memory, press the MEMORY button so that the
M disappears from the screen.
3
5
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind)/'^ button or the
F.FWD/^ button when playback is stopped.When the
tape reaches the point at which the counter was set to
zero, the tape will stop. Press the PLAY/
a button to
watch the tape.
Helpful Hints
The real-time counter memory will
not funaion during Repeat Play
mode. Details are on page 37.
You may only set one real-time
counter memory at a time. If you
set the reoZ-t/me counter to zero at
a second location, the previous real­
time counter to zero setting will be
lost