Philips CCB 132AT User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before Using the TV/VCR S
Putting Batteries in the Remote Control
I
Remove the battery compartment lid on the bottom of
the remote control by sliding it in the direction of the
arrow.
2
Place
two
AA
batteries
inside
the
battery
compartment
with their + and - ends aligned as indicated.
3
Replace the battery compartment lid.
1
2
3
Recording Prevention
Video cassette tapes have record tabs to ensure that recordings
are not accidentally erased.
I
To prevent accidental recording, break off the tab with a
screwdriver.
2
To record again, cover the hole with cellophane tape.
Using the Remote Control
• Point the remote control at theTV/VCR’s remote sensor.
• Do not put objects between the remote control and the
TV/VCR,
I
2
TV/VCR Maintenance
# In this TV/VCR. use only tapes with the [V|jg| mark.
# Make sure any light adhesive stick-on notes are removed from
the video cassette tape before putting the tape in the TV/VCR.
Removable labels tike these can jam the TV/VCR,
Periodic maintenance is required to maintain yourTV/VCR’s
excellent performance.This TV/VCR has an automatic head
cleaning system. However, the video heads will eventually require
cleaning or replacement. Only an authorized service center
should perform this service.
The remote control and its batteries
are supplied.
Do not mix alkaline and man
ganese batteries.
Do not mix old and new batteries.