Daily, 32 timer recording – Philips CCB 132AT User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32 Timer Recording
Follow the steps below to program theTV/VCR to record TV pro
grams while you’re away from home.TheTV/VCR will turn itself
on, record, and turn itself off automatically. Before you begin, make
sure:
# The clock is set. If not, CLOCK MUST BE SET appears, fol
lowed by the SET CLOCK menu.
* Channels are set up.
® There is a tape in the TV/VCR. (Make sure the tape’s record tab
is intact and the tape is long enough to record the program.)
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step I.
[
Press the MENU button.
PRIM. SETUP
VCR PROGRAM
VCF13ETIJP
CAmON
reminder
BRIGHTNESS
2
Press the PLAY/A button or the STOP/T button to select
VCR PROGRAM, then press the F.FWD/^ button.
VCR PROGRAM
> ONCE
[>AILY(MON‘FR1)
weekly
PROGRAM REVfEW
SELECT A» CHOOSE ►
TO END PRESS EXIT
3
Press the PLAY/A button or the STOP/V button to seiect
a ONCE, DAILY, OR WEEKLY recording.then, press the
F.FWD/^ button.
• ONCE:
The TV/VCR will record a TV program on any day you
choose, up to 12 months away.
• DAILY:
The TV/VCR will record every day from Monday to
Friday - starting at the same time and recording the same channel
for the same length of time.
• WEEKLY:
The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
Daily
Recording
(example)
'DAILY PROGRAM (MON.FRI)
PROGRAM .1 2 3 4 S 6 7 B-
SELECT PROGRAM NUMBER
TO END PRESS EXIT
2-3
Helpfiii Hints
With ShowGuard, you don't have to
worry about losing your timer
recordings. If the power fails, pro
grammed timer recordings wHI be
restored when the dock is reset
(The dock will reset itself automati
cally if you are using the AUTO
CLOCK feature. Details are on
pages 14-17. If you are not using
the AUTO CLOCK feature, reset the
dock manually. Details are on pages
12-13.) The timer recording will not
occur only if the timer recording was
scheduled to take place during the
power failure.
You connût set a timer recording if
DEFEAT RECORDING is set to ON.
Details are on page 36.