24 adjusting the picture controls – Philips CCB 132AT User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
24 Adjusting the Picture Controls
Follow these steps to adjust theTV/VCR’s brightness, picture,
color, tint, and sharpness.
I
Press the MENU button.
TO ADJUST PRESS
1> BRIGHTNESS
i PICTURE
1
color
I
TINT
SHARPNESS
[ TV RESET
2
Press the PLAY/A button or the STOP/T button to select
the desired control (BRIGHTNESS, for example).
3
Press the REW(lnd)/’^ button or the F.FWD/^ button to
adjust the picture control. (Refer to the chart on page 25.)
4
When you finish, press the STATUS/EXIT button.
2
4
Helpful Hints
The on-screen menus shown on
page 25 will disappear if no adjust
ments are made within 60 seconds.
The original settings will probably
give you the best piaure quality.
To reset the picture controls to the
original settings, press the MENU
button, then press the PLAY/A but
ton or the STOP/y button to select
TV RESET, then press the F.FWD/^
button.TV RESET COMPLETED will
appear on the screen briefly.