Philips CCB 132AT - Manual (Page 35)

Checking or Clearing Timer Recordings
With theTV/VCR on, press the MENU button.
2
Press the PLAY/A button or the STOP/T button to select
VCR PROGRAM, then press the F.FWD/^ button.
Timer Recording (confd) 35
2"4
3
Press the PLAY/A button or the STOP/T button to select
PROGRAM REVIEW, then press the F.FWD/^ button.
The
timer recording information for the program in the lowest num­
bered position will appear on the screen. If no timer recordings
are programmed, nothing will happen when you select PROGRAM
REVIEW and press the F.FWD/^ button.
Press the F.FWD/^ button to display information about
the next programmed timer recording. (If you do not press
a button within JO seconds, information about the next pro­
grammed timer recording will appear.) This will continue until all
positions have been displayed.Then, the menu will disappear.You
can exit the Program Review at any time by pressing the STA-
TUS/EXIT button.
5
To cancel the timer recording displayed, press the CLEAR
button.
Either the display will disappear or information about
other timer recordings will appear. If you do not press any other
buttons, the display will disappear after all timer recordings have
been displayed.
6
Repeat steps I - 4 to make sure you have cleared the cor­
rect position.
Helpful Hint
With ShowGuard, you don't have to
worry about losing your timer
recordings. If the power fails, pro­
grammed timer recordings will be
restored when the clock is reset
(The clock will reset itself automati­
cally if you are using the AUTO
CLOCK feature. Details are on
pages 14-17. If you are not using
the AUTO CLOCK feature, reset the
clock manually. Details are on pages
12-13.) The timer recording will not
occur only if the timer recording was
scheduled to take place during the
power failure.