Philips CCB 132AT User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Rerecording (Tape Duplication) 31
I
Make the connections shown above, using audio and video
cables. Connect the source unit (VCR or camcorder) to a
powef source after connections are made.
2
The source unit will play your tape.
Insert a prerecorded tape in
the source unit.
If playback begins, press the STOP button on the
unit.
3
TheTVA^CR will record your tape.
Insert a blank tape In the
TV/VCR.
Make sure the tape’s record tab is intact.The TV/VCR
power will turn on automatically.
4
Point the TV/VCR remote control at the TV/VCR. Press
Number buttons 0,0 so that A/V IN appears on the screen.
5
Point the TV/VCR remote control at the TV/VCR. Press the
SPEED button until the desired tape speed (SP or SLP)
appears on the screen.
6
Press the PLAY button on the source unit and the
REC(ord)/OTR button on your TV/VCR at the same time.
Copying will begin.
7
To stop copying, press the STOP/EJECT button on the
TV/VCR, then stop the tape on the source unit (VCR or
camcorder).
Helpful Hints
Unauthorized recording of copy
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
Different brands of equipment may
operate differently.
Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
Audio and video cables are not
included.