Philips CCB 132AT - Manual (Page 30)

30 One-Touch Recording
The One-Touch Recording (OTR) function allows you to program an
immediate timed recording from 30 minutes to eight hours long
without setting the timer.
Before you begin, make sure:
> Channels are set up.
# There is a tape in theTV/VCR.The record tab must be intact.
I
Use the CH(annel) / button or the Number buttons to
select the channel you want to record.
2
Press the SPEED button until the desired recording speed
(SP or SLP) appears on the screen. Details are on page 29.
3
Prejt the REC(ord)/OTR button repeatedly until the desired
recording length appears in the upper right corner of the screen.
Recording will begin immediately.The RECORD light will appear.
'OTR
CKI2
LENGTH
CANCEL
length 0:30
PRESS OTR
PRESS CLEAR
4
To stop an OTR before recording is finished, press the
STOP/EJECT button on theTV/VCR.
Or, press the REC(ord)/OTR button, then press the CLEAR
button, then press the STOP/T button on the remote con­
trol.
4 Press the STOP/EJECT button
on the TV/VCR to stop the
OTR.
Helpful Hints
To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button until the
desired recording length appears on
the screen.
You can not pause an OTR.
To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but­
ton.
You cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 36.
You can change the tape speed withi-.
the SPEED button while a recording
is in progress, but some distortion
may appear on the tope.