IC Realtime 2 Megapixel Full HD 20x Optical Network PTZ Camera IP66 300 ft IR (ICIP2001HDIR) - Manual (Page 27)

23
Figure 2-14
Please refer to the following sheet for detailed informaiton.
Parameter Function
Scene Please select a scene from the dropdown list you want to set.
Detect balance
There are three modes: compromise mode, omission detect less and error detect
less.
Sensitivity
The level ranges from 1 to 10. The default setup is 5. The higher the sensitivity is,
the easier for the device to detect the low contrast object and small object. At the
same time, the error detect may become more.
Anti-
disturbance
mode
It is to control the random disturbance in the scene.
Backlight scene
enable Check the box here so that the device can have higher recognition capability in the
backlight scene.
Shadow scene
enable Check the box here so that the device can have higher recognition capability in the
shadow scene.
Target filter
Click button ，you can set the target filter model in this scene. Click the
button ，you can remove selected target filter model.
Add detect
region
Click button , you can draw a detection zone.
Add exclued
region
Click button ，you can draw the privacy mask (shield) zone.