IC Realtime 2 Megapixel Full HD 20x Optical Network PTZ Camera IP66 300 ft IR (ICIP2001HDIR) - Manual (Page 26)

22
2.2.3.3 Alarm Activation Setup
Alarm activation setup is shown as in Figure 2-13.
Figure 2-13
Please refer to the following sheet for detailed informaiton.
Parameter Function
Rule Working period
Here you can set rule arm and disarm period. Please click the Setup button to
set.
Record
Check the box here so that the device can record when alarm activation
occurred.
Relay output
Check the box here so that the device can output an alarm when alarm
activation occurred.
Send e-mail
z Check the box here so that the device can send out an email when alarm
activation occurred.
z Please note current function is null when the device is offline, or IP conflict
occurred.
Snapshot
Check the box here so that the device can snapshot when alarm activation
occurred.
Copy
Select a rule name from the dropdown list and then click button; you can
copy the alarm activation setup of current rule to the selected rule.
2.2.4 Parameter
The parameter interface is shown as in Figure 2-14.