IC Realtime 520TVL Rugged Vandal/Weather Proof Day/Night IR Dome Camera (ELMC1) - Manual

Transport Camera
QUICK INSTALL GUIDE
Dear Customers!
By selecting this product, you have decided to use a professional device that guarantees highest quality and
reliability. We would like to thank you very much for your confidence and kindly ask you to read the following
instructions carefully before installation and operation in order to take full advantage of all quality features
regarding this product.
The lighting flash with an arrowhead symbol, within an
equilateral triangle is intended to alert the user to the presence
of non-insulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at its own
expense.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to
operate the equipment.
CAUTION
– To prevent electric shock and risk of the fire hazards
- Do NOT use power source other than that specified.
- Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform to all local codes.
Precautions
z
Please read the manual carefully before the installation in order to set up the camera correctly
and to obtain the best picture quality.
z Please keep the manual in good condition for your future reference and service application.
z Installation and services should be only carried out by an authorized personnel according to
local safety regulations.
z If any liquid or solid matter gets into the housing, immediately disconnect the camera from
power supply and have it checked by your authorized dealer before reusing..
z Avoid installing the camera at extremely hot or cold places.
z If you are not a certified person, never try to dismantle the camera. To avoid electric shock,
never remove the screws or covers. There are no parts inside that need maintenance by the
user. All maintenance should be carried out by qualified personnel.
z Avoid installing the camera at a place of high humidity.
z Avoid installing the camera at the place exposed to gas or oil.
z Keep the top glass of the lens always clean in order to obtain the best picture quality all the
time. Be careful not to be stained by fingerprint.
z Don't face the camera directly toward sunlight or sunlight reflecting area.
CCD may go defective at this condition.
z Please give a special attention to keep the unit from dangerous drop or external shock during
the process of transportation or handling.
z Never try to touch the camera in wet hand. It may cause an electric shock.
z Do not expose the camera to radioactivity. It causes a serious damage on the CCD.
Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or implied, including
but not limited to, the implied warranties of merchantability, fitness for any particular purpose, or non-
infringement of the third party's right. This publication could include technical inaccuracies or
typographical errors. Changes are added to the information herein, at any time, for the improvements
of this publication and/or the corresponding product(s).
Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for replacement or reasonable
maintenance of the product, for the cases, including but not limited to below:
(1) Any damage and loss, including without limitation, direct or indirect, special, consequential or
exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent operation of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any reason or cause
including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of the system
combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being photogenic subject,
due to violation of privacy with the result of that surveillance-camera's picture, including saved
data, for some reason, becomes public or is used for the purpose other than surveillance.
Package
Camera ( x 1), Manual ( x 1), Screws (x 1 set)
Others ( x )
Installation
Troubleshooting
If there are problems in operating, please refer to the checklist below. If the problem persists, please
contact the agent where this product is purchased.
Problems
Troubleshooting
Nothing appears on the screen.
* Please check that the power cord and line connection
between the camera and monitor are fixed properly.
* Please check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
The image on the screen is dim.
* Is lens stained with dirt? Clean your lens with soft, clean
cloth.
* Set the monitor to proper condition.
* if the camera is exposed to too strong light, change the
camera position.
The image on the screen is
dark.
* Adjust the contrast feature of the monitor.
* If you have an intermediate device, set the 75Ω / Hi-Z
properly (Please check the impedance)
The camera is not working
properly, and the surface of the
camera is hot.
* Please check that you have properly connected the camera
to an appropriate power source.
The screen flickers continually. * Please check that direction of camera turns toward the Sun.
Dimension (mm)
Specification
*Specifications are subject to change without prior notice for better improvement.
60
60
70.3
90
30˚
Angle Hole
Audio
Video
Switch Push
(Mirror On/Off)
Push: Off
Pop: On
Image sensor 1/3" Super Sensitive Color CCD Sensor
Class Rugged Vandalproof Camera
Effective Pixels 768(H) x 494(V).NTSC 752(H) x 582(V).PAL
H. Resolution 520 TVL(Color) / 560 TVL(Night)
Min.Illumination 0Lux
Synchronizing system Internal
Scanning system 2:1 Interlaced
Video output 1.0 to 1.2 Vp-p Composite 75 Ohms
S/N ratio More than 50dB (AGC Off)
Smear effect 0.005%
Gamma Correction Standard =0.45
White balance ATW(2,100 ~ 9,100K)
Gain control 6dB ~ 40dB Auto
Lens 2.9mm Fixed Lens (120˚ AOV)
AOVLens(Option) 3.6mm(92˚) (4.3mm, 6.0mm)
Power source DC12V (Tolerance:9.5V ~24V)
Operating current 80mA at DC12V(IR Off) / 190mA at DC12V(IR On)
Audio -35dB/mV
Operating temperature -4˚ ~ 122˚F (-20˚C ~ +50˚C)
Operating Humidity 90% RH
External mirror option Mirror switch ON / OFF
Measurement (mm) 60(W) x 70.3(V) x 90(L)
Weight (Approx.g) 490
Caution!
In case of Audio (option), Do NOT use the camera for OUTDOOR use
Any liquid gets into the housing ( VOID WARRANTY)