IC Realtime H.264E Hybrid DVRs 4/8/16-CH Analog + 4/8/16-CH IP - Manual (Page 59)

49
In
X328H328H328H
Figure 4-36, click page switch button, the interface is shown as in Figure 4-40.
Here you can activate the following functions:
z
Preset
z Tour
z Pattern
z Auto scan
z Auto pan
z Flip
z Reset
z Page switch
Figure 4-40
Note:
z
Preset, tour and pattern all need the value to be the control parameter. You can define
it as you require.
z You need to refer to your speed dome user’s manual for Aux definition. In some
cases, it can be used for special process.
z The following setups are usually operated in the
X332H332H332H
Figure 4-36, Figure 4-39 and Figure
4-40.
4.9.1Preset Setup
In Figure 4-36, use eight direction arrows to adjust camera to the proper position.
In Figure 4-39, click preset button and input preset number. The interface is shown as in
Figure 4-41.
Now you can add this preset to one tour.
Figure 4-41
4.9.2 Activate Preset
In Figure 4-40, please input preset number in the No. blank, and click preset button.