Figure 7-32 – IC Realtime H.264E Hybrid DVRs 4/8/16-CH Analog + 4/8/16-CH IP User Manual
Page 122
112
Figure 7-32
Please refer to the following sheet for detailed information.
Parameter
Function
Ethernet
Please select the network card first.
DHCP
Dynamically get IP address. You can get the device IP from
the DHCP server if you enabled this function.
TCP Port
Default value is 37777.
HTTP Port
Default value is 80.
UDP Port
Default value is 37778.
RTSP Port
Default value is 554.
Max Connection
Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
Multiple
cast
group
Set MULCAST address and port.
Enable MULCAST function.
Remote
Host
PPPOE
Input the PPPoE user name and password you get from the
IPS (internet service provider) and enable PPPoE function.
Please save current setup and then reboot the device to get
the setup activated.
Device connects to the internet via PPPoE after reboot. You
can get the IP address in the WAN from the IP address